Bringing Photographers Closer to Their Natural World


 

Home                                  

Schedule of Offerings

Contest Winners

Environmental Policy  

Group Leaders

Links to Helpful Sites

Lists of Items to Bring

Used Equipment

Participant Photo Galleries

Recommended Reading

Technical Tips & FAQ

Workshop Registration



In the Field, © Lonnie Brock

Tripods and Other Types of Camera Support

by Lonnie Brock
 
During the course of our workshops, we have had several discussions with participants about the merits of tripod use.  These are some of the questions we often encounter relating to tripods.  Much of this technical data is derived from information distributed by Really Right Stuff.
When do I really need to use a tripod?

    You should use a tripod most of the times that you expose by ambient (not strobe) light. When tripod use is prohibited or impractical, try to use a monopod, or a shoulder stock.  There are image stabilization lenses available for some systems that allow the photographer to handhold his camera at slower speeds, but remember, that only adds about one to two (if you are really steady) stops. 

Why is a tripod essential?

    Many believe that blur due to lens movement is inevitable at any shutter speed slower than 1/1000 sec.  At very best, the general rule is that you might (depending on how steady you are) be able to handhold at a speed that is the reciprocal of the focal length of the lens you are using (i.e., 1/300 second with a 300 mm lens).  Most of us do think that the use of a tripod also promotes greater care in composition. The purist may even say that handholding is strictly for dead photographers: a human pulse beat will cause 200 microns (about 0.008 inch) displacement for 1/10th second. Assuming a shutter speed of 1/250th sec., this movement alone will cause a 22% loss of resolution with a system that is otherwise capable of reproducing 100 lines-per-mm (lpm). And at a shutter speed of 1/125th sec., this performance would degrade to only 53 lpm—a 47% waste of what you purchased (refer John B. Williams: Image Clarity, page 191).  However, we have all seen extremely sharp images made with image stabilization lenses and at faster speeds.  In the end, you must judge for yourself how steady you are and what you consider sharp enough.

    With today's stabilization systems and camera's increased performance at higher and higher ISO settings, many people claim there is really no longer any use for a tripod. We totally disagree. The major reason for using a tripod continues to be better compositions. It is impossible to hand hold your camera in one spot without a tripod. When your camera does not move, you have the advantage on analyzing and perfecting you composition by checking your entire view finder; up, down, left, right, including corners, to eliminate unwanted data and include only data that adds to and improves your composition.  This method is easiest and best way to make your photos better.

Can I make rapid changes of position and composition when using a tripod?

    Once you have become accustomed to using the tripod and head you select, you should be able to move it quickly enough to follow animals and even to pan flying birds.  Luckily, landscapes don't move around very quickly.  If you are uncomfortable with setting up with the tripod, you can pick your location and viewpoint, and create your basic composition with the camera off the tripod head. You can then mount the camera on top of the tripod for final composition, “fine tuning” and focus.  After you become comfortable with the tripod and head, this should seldom be necessary.

    Different heads afford different levels of ease of movement.  We suggest you talk to your friends about the heads they use and their level of satisfaction with them.  Some people prefer tilt/pan heads, other like ball heads. We believe there are advantages to both types and you might like to try both before making a decision.

It's cumbersome to attach and remove a camera from my tripod's head. Is there an easier way?

    Use of the common “screw on” method for attaching your equipment to the tripod head is tedious, insecure, and invites needless wear. Instead, nearly everyone will use a reliable quick-release system.  A quick-release system consists of two basic pieces: a quick-release clamp, and a compatible mounting plate. The clamp is attached (permanently) to your tripod head, and the plate is screwed onto the base of any camera or lens that you intend to mount on the clamp. We normally leave the plates on our equipment, so we need several plates. The Bogen heads come with a quick release system including a plate and additional plates can be purchased.  If you have a ball head system, we would encourage you to check out the mounting plates sold by Really Right Stuff (www.reallyrightstuff.com)-- we feel they are certainly some of  the best available.

Return to Top of Page

To register online on a secure registration form, or to print out a registration form, go to Registration,
or call Roger Devore at 618-589-1729 to register by phone or to determine which workshops still have space available or email
Rdfoto@aol.com. Please review the Refund/Cancellation Policy, as well as the other important information, as stated in the Administrative Notes section prior to registration.